Grid
List
IAE 6 Rail Sheep Hurdle C/w Hinged Gate 8'2
1000mm High
Opening of gate section is 835mm wide
Gate has a top operated spring loaded slide bolt
c/w hinged gate built into one end
c/w drilled lugs at both end
Approx weight: 31kg
£313.80
ex VAT £261.50
ex VAT £261.50
IAE Part Meshed Lambing Hurdle - 6'
Part Meshed Lambing Hurdle can be used to form banks of single runs or back to back runs of lambing pens due to top loose ring and fixed 60mm x 60mm bottom lug type coupling arrangement
Not compatible with standard 7 rail interlocking sheep hurdles
1050mm high with 5 horizontal rails and clad with 50mm x 50mm weldmesh up to a height of 524mm from finished floor level
Approx Weight: 11kg
£48.00
ex VAT £40.00
ex VAT £40.00
Joining Pin - Sheep Hurdle
Coupling Rod to Suit Cattle Hurdles is a walking stick type bar connects all hurdles to each other and to joining frames etc.
Position of top lugs on hurdle enables coupling bar to eliminate potential leg trap between vertical end stiles of hurdles
£8.40
ex VAT £7.00
ex VAT £7.00
Ritchie Economy Sheep Hurdle C/w Pin 4'
Pin together for easy assembly (pin included)
7 horizontal rails with an overall height of 968 mm which allows for easy access to and from pens
Internal venting for improved bio security
All steelwork is hot dipped galvanised finish
£43.20
ex VAT £36.00
ex VAT £36.00
Ritchie Economy Sheep Hurdle C/w Pin 8'
Pin together for easy assembly (pin included)
7 horizontal rails with an overall height of 968 mm which allows for easy access to and from pens
Internal venting for improved bio security
All steelwork is hot dipped galvanised finish
£60.00
ex VAT £50.00
ex VAT £50.00
